A slowed and reverb song is two moves: play the song slower, then put it in a bigger room. Everything else is taste. Here is how to do it well, on a phone or a computer, without a music program.
1. Start with a clean file
Use the best copy of the song you have: an MP3 at 192 kbps or higher, an M4A or a WAV. Slowing a song down makes every flaw last longer, so a low quality rip sounds worse slowed than at normal speed.
2. Pick the speed
Most slowed edits sit between 70 and 85% of the normal speed. At 85% (the Slowed preset) the voice drops by about 2.8 semitones and the song still moves. At 72% (Super slowed) it drops almost 6 semitones and turns heavy and dreamy. Speed and pitch go down together, the way a record does when you slow the turntable, and that deeper voice is part of the sound.
3. Add the reverb
Turn Room up to about 30 to 45% and set Size between 3 and 5 seconds. A bigger Size makes the hall bigger and the tail longer. Listen to the chorus: if words start to blur into each other, bring Room down a little.
4. Keep the low end clean
This is where many edits go wrong. Reverb on the bass and kick builds up into mud, and on a car system or headphones with real bass it sounds bad. Cut the low end out of the reverb only, somewhere between 150 and 250 Hz, and leave the dry bass alone. Producers on Reddit and YouTube give exactly this tip, and the Low cut knob on the maker does it for you, set to 200 Hz from the start. See why slowed edits sound muddy for more.
5. Add a little bass (optional)
Slowing a song lowers everything, and a small lift of 2 to 3 dB under 110 Hz gives back the weight. Do not overdo it; slowed bass is already deep.
6. Pick the part and save
For TikTok, Reels and Shorts you usually need 15 to 60 seconds. Play the song to the part you want, choose a clip length, and save. Choose MP3 to share it, or WAV if you will put it into a video editor and export again.
Settings to copy
| Style | Speed | Room | Size | Low cut |
|---|---|---|---|---|
| Classic slowed + reverb | 85% | 35% | 3.2 s | 200 Hz |
| Super slowed | 72% | 50% | 5 s | 200 Hz |
| Empty arena | 80% | 60% | 7 s | 250 Hz |
Doing it in a music program instead
In FL Studio, Ableton, Logic or Audacity the same steps apply: change the speed of the audio (resample or re-pitch it, so pitch follows speed), put a reverb on a send rather than directly on the track, and filter the low end out of that send. It gives you more control, but for a straight slowed edit of a song the browser maker is quicker.
Sources
- Google page one for "slowed + reverb", read 19 Nov 2026, including its summary that slowed edits usually run at 70 to 85% speed.
- r/electronicmusic thread "I made a website to slow and reverb songs so they hit different", read 19 Nov 2026 (a producer's advice to keep reverb above 150 to 200 Hz).
- r/ableton thread "anyone here knows tips to make SLOW + REVERB sound more huge?", read 19 Nov 2026.
- YouTube comments on "HOW TO SLOW AND REVERB (FL Studio) EASIEST WAY" and "How to Make Slowed and Reverb Songs in FL Studio", read 19 Nov 2026.