Reverb without slowing the song
Sometimes you only want the space: a voice note that sounds like it was sung in a hall, a beat that needs air, or a song that should sound far away under a video. On this page the deck opens at normal speed (100%, no key change) with a 40% room, so you only add reverb. You can still press a preset at any time if you want a slowed or sped up version as well.
How to add reverb to an MP3
- Tap Put a song in and choose the MP3, WAV or M4A file. It plays with reverb straight away.
- Turn Room to set how much reverb you hear and Size to set how long it rings, from a small room (about 1 s) to a huge hall (6 s and more).
- Press Eject MP3 to save the file with the reverb.
What each knob does
| Knob | What it changes | Start here |
|---|---|---|
| Room | How loud the reverb is against the original sound (the wet and dry mix) | 30 to 45% |
| Size | How long the reverb takes to die away, from a small room to a cathedral | 2.5 to 3.5 s |
| Low cut | Removes the low end from the reverb only, so the bass and kick stay clear | 150 to 250 Hz |
| Bass | Adds or removes low end on the whole song | 0 to +3 dB |
Why the reverb has its own low cut
Reverb on bass notes builds up into a boomy, muddy wash, especially on speakers or a car system with real sub bass. Producers fix this by filtering the low end out of the reverb and leaving the dry bass alone. The Low cut knob here does exactly that, set to 200 Hz to start. Turn it up if the song still sounds cloudy; turn it down to 80 Hz for a darker, fuller reverb on quiet songs.
How the reverb is made
The reverb is a convolution reverb built in your browser: the song is combined with a burst of decaying sound shaped by the Size knob, a short pre delay keeps the start of each word clear, and the result is mixed back with the original by the Room knob. The finished file is then levelled so the loudest point sits just under the top, so adding reverb never makes the file clip.
Room sizes to try
| Sound you want | Room | Size | Low cut |
|---|---|---|---|
| A little air on a voice or beat | 15% | 1.2 s | 250 Hz |
| A song in a hall | 35% | 3 s | 200 Hz |
| Far away, under a video | 60% | 5 s | 200 Hz |
| Empty arena | 75% | 8 s | 300 Hz |
Common mistakes
- Too much Room on a fast song. The words run into each other. Keep Room under 30% when the song is busy.
- Low cut at the bottom. With Low cut at 20 Hz the reverb fills up the bass. Start at 200 Hz.
- A long tail on a clip. If you are saving a 15 s clip, a 6 s Size will still be ringing when the clip fades out. Use 2 to 3 s for short clips.
- Adding reverb twice. If the song already sounds roomy, a little goes a long way. Try 15% first.
Files and privacy
The audio never leaves your device; there is no upload, no sign up and no limit. Save MP3 for sharing or WAV if you will keep editing the sound.
Questions
Can I add reverb without slowing the song down?
Yes. This page starts at 100% speed, so only reverb is added. Leave the varispeed at 100%.
Will adding reverb make my MP3 clip?
No. The finished file is levelled so its loudest point stays just below full scale.