Slowed and Reverb Maker

Home / Guides / Why does my slowed edit sound muddy?

Why does my slowed edit sound muddy?

It is the most common complaint about slowed + reverb edits: the song sounds flat, cloudy or muddy, and on a system with real bass it can sound bad. One listener put it simply: slowed music can be great, but once it is reverbed and played through a subwoofer, it is hard to listen to. Here is what causes it and how to fix it on the maker.

Why it happens

Slowing a song moves everything down. Bass notes go lower, the kick drum gets longer and the voice drops into the same range as the instruments. Reverb then smears all of that over several seconds. Low notes carry the most energy, so they build up first and cover everything else.

Fix 1: cut the low end out of the reverb

Filter the reverb, not the song. A low cut of 150 to 250 Hz on the reverb keeps the bass and kick dry and tight while the voice and melody still float. A producer's advice to a slowed reverb site builder was exactly this: only reverb what is above about 150 to 200 Hz. On the maker, the Low cut knob does it and starts at 200 Hz.

Fix 2: less Room

If words blur together, there is too much reverb in the mix. Bring Room down to 25 to 35%.

Fix 3: a shorter Size

A huge hall sounds great for 1 note and muddy for a fast verse. Try Size at 2.5 to 3.5 s for busy songs and keep 5 s and more for slow ballads.

Fix 4: go easy on bass

Slowed songs are already deeper. Keep Bass at 0 to +2 dB; turn it down on songs with a heavy 808.

Fix 5: start from a better file

Slowing makes compression artifacts last longer. A 128 kbps rip from a video often sounds swirly when slowed. Use the best quality file you have, and save the edit as WAV if it will be edited and compressed again.

Quick settings for a clean slowed edit

KnobCleanDreamy
Speed85%78%
Room30%50%
Size2.8 s5 s
Low cut250 Hz180 Hz
Bass0 dB+2 dB

Sources

Make a slowed and reverb song now